Back to search

Michigan Technological University

CRACK PATTERN SIMULATION OF PRESSURIZED BOROSILICATE GLASS TUBE UNDER PELLET IMPACT USING ALE METHOD

Abstract

dc:description.abstract

Transformer bushings are a common target for sniper attacks to cause power failure in large areas. Given the size, internal pressure and brittle nature of transformer bushing, pellet impact causes damage to surrounding components due to broken bushing pieces. To mitigate this, a project was initiated by United States Burau of Reclaimation to develop a safety mechanism. Finite Element Analysis is proposed to optimize and reduce cost of the design. A simplified Finite Element model is created which consists of 0.22 caliber lead pellet impacting Pyrex 7740 borosilicate glass tube. Previous studies on the effect of the mesh pattern, size and cap geometry were carried out. One of the biggest factors which can help in mitigating the transformer component damage is internal pressure of bushing fluid. This study focuses on developing a Finite Element model which captures the fluid-structure interaction between glass tube and internal pressurized air. Arbitrary Lagrangian Eulerian code of LS-DYNA is used to simulate this interaction. This report describes the modelling techniques used to simulate the pellet impact on pressurized tube. Failure strain calculations are also discussed in the report. The effect of internal pressure and failure strain are addressed. Crack pattern and broken glass fragments size are considered for a comparison between the pellet impact simulation and experiment.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Open Access Master's Report
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bhumkar, Omkar
Committee members dc:contributor.committeemember
  • Trisha Sain
  • Stephen Morse
Contributors dc:contributor
  • Gregory Odegard

Subjects

dc:subject × 4

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bhumkar, Omkar. CRACK PATTERN SIMULATION OF PRESSURIZED BOROSILICATE GLASS TUBE UNDER PELLET IMPACT USING ALE METHOD. Open Access Master's Report thesis, https://doi.org/10.37099/mtu.dc.etdr/955