Back to search

Michigan Technological University

INFLUENCE OF RAPID SOLIDIFICATION AND WROUGHT PROCESSING ON PRECIPITATION STRENGTHENING AND DEFORMATION MECHANISMS IN AL-SC-ZR ALLOYS

Abstract

dc:description.abstract

Al-Sc-Zr alloys have drawn increasing attention in the last several decades due to their strengthening and coarsening resistance. In this study, solute concentrations of Sc and Zr were increased beyond their equilibrium solubilities without primary precipitate formation using melt-spinning. The melt-spun ribbon was metallurgically bonded into bulk shape using extrusion. With the proper aging treatment, the mechanical properties of the supersaturated melt-spun ribbon and extruded rod were found to be significantly higher than a baseline dilute alloy. Increased mechanical properties include microhardness, tensile strength at ambient-temperature, and compressive strength and threshold stress at and elevated-temperature. These increases were related to the larger precipitate radius and volume fractions found in the melt-spun alloys. Scanning transmission electron microscopy (STEM) was used to investigate the microstructural changes in the supersaturated alloys that led to the mechanical property improvements. The precipitate size and number density, precipitate volume fraction, grain size and dislocation density in the melt-spun ribbon and extruded rod were quantified in the STEM images. The elemental compositions and distributions in the precipitate and matrix were measured using the energy-dispersive X-ray spectroscopy (EDS) and elemental mapping in STEM mode. The precipitate strengthening, threshold stress and precipitate coarsening behavior in the supersaturated melt-spun ribbon and extruded rod were modeled using the measured microstructures. The predictions of precipitate strengthening and threshold stress agreed with the observed experimental results. The precipitate coarsening rates were found to be accelerated by the supersaturated solute additions and retarded by the increasing precipitate volume fraction during overaging.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Materials Science and Engineering (PhD)
Level thesis:degree_level
Open Access Dissertation
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yang, Yang
Committee members dc:contributor.committeemember
  • Stephen A. Hackney
  • Douglas J. Swenson
  • Erik G. Herbert
  • Gregory M. Odegard
Contributors dc:contributor
  • Paul G. Sanders

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yang, Yang. INFLUENCE OF RAPID SOLIDIFICATION AND WROUGHT PROCESSING ON PRECIPITATION STRENGTHENING AND DEFORMATION MECHANISMS IN AL-SC-ZR ALLOYS. Open Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1107