Michigan Technological University
Real time adaptive relay settings for Microgrid protection verified using Hardware in Loop
Abstract
dc:description.abstractMicrogrids with penetration of renewables is imposing new challenges for system protection. Renewables are characterized with high source impedance which limit the short circuit current. The value of short-circuit current is limited due to converters used which limit the current to a maximum of 1.1 to 1.5 times maximum rated load current. This can result in faults during the islanded mode of microgrid to go unnoticed if the relay settings are not adapted to account for it. The presence of such uncleared faults in the microgrid can result in exposing it to overcurrent for a long time which can damage the equipment. One solution is to have different protection element pickup settings for different modes of operation. This report discusses the development of an algorithm to switch these settings upon microgrid state changes and test the algorithm using OPAL-RT hardware in loop real-time testing with SEL-351S relay as the hardware.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Electrical Engineering (MS)
- Level thesis:degree_level
- Open Access Master's Report
- Discipline thesis:degree_discipline
- Department of Electrical and Computer Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Harnekar, Aadam
- Committee members dc:contributor.committeemember
-
- Glen E. Archer
- Leonard J. Bohmann
- Contributors dc:contributor
-
- Bruce A. Mork
Subjects
dc:subject × 6Identifiers
dc:identifier.*- Identifier
- https://digitalcommons.mtu.edu/etdr/1228