Back to search

Michigan Technological University

MECHANICAL PROPERTIES AND CHARACTERIZATION OF EPOXY AND CARBON FIBER/EPOXY COMPOSITES MODIFIED WITH HIGHLY ENTANGLED AS-RECEIVED AND ACID TREATED CARBON NANOTUBES

Abstract

dc:description.abstract

Huntsman-Merrimack MIRALON® carbon nanotubes (CNT’s) are a novel, highly entangled, commercially available, and scalable format of nanotubes. As-received and acid-treated CNT’s were added to aerospace grade epoxy (CYCOM® 977-3) and the composites were characterized. The epoxy resin is expected to infiltrate the network of the CNT’s and could improve mechanical properties. Epoxy composites were tested for flexural and viscoelastic properties and the as-received and acid treated CNT’s were characterized using field-emission scanning and transmission electron microscopy, thermogravimetric analysis, and Raman and X-ray photoelectron spectroscopy. Composites containing 0.4 wt% as-received CNT’s showed an increase in flexural strength, from 136.9 MPa for neat epoxy to 147.5 MPa. In addition, the flexural modulus increased from 3.88 GPa for the neat epoxy to 4.24 GPa and 4.49 GPa for the 2.0 wt% and 3.0 wt% as-received CNT/epoxy composites, respectively. FE-SEM micrographs indicated good dispersion of the CNT’s in the epoxy composites containing as-received CNT’s and CNT’s treated for 6 hours in 10 M nitric acid at 120 °C. CNT’s treated with 10 M nitric acid for 6 hours at 120 °C added oxygen containing functional groups (C-O, C=O, and O=C-O) and removed iron catalyst present on the as-received CNT’s, but the flexural properties of to the as-received CNT/epoxy composites. As-received and highly entangled Huntsman-Merrimack MIRALON® CNT sock materials (HGR and/or X55 grades) were added to unidirectional Hexcel HexTow IM7 carbon fiber/Solvay CYCOM® 977-3 epoxy prepreg system and the hybrid composites were characterized for tensile, flexural, and short beam shear properties. The incorporation of 1 CNT sock layer interleaving all of the CF/epoxy prepreg layers in the layup did not improve either the 0° or 90° tensile or flexural properties of the composite. Additionally, there was no improvement in the interlaminar shear strength of the hybrid composites, when 1, 2, or 3 CNT sock layers (HGR and X55 grades) were added between each CF/epoxy prepreg layer

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Chemical Engineering (PhD)
Level thesis:degree_level
Campus Access Dissertation
Discipline thesis:degree_discipline
Department of Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Krieg, Aaron
Committee members dc:contributor.committeemember
  • Ibrahim Miskioglu
  • Timothy Eisele
Contributors dc:contributor
  • Julia King
  • Gregory Odegard

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Krieg, Aaron. MECHANICAL PROPERTIES AND CHARACTERIZATION OF EPOXY AND CARBON FIBER/EPOXY COMPOSITES MODIFIED WITH HIGHLY ENTANGLED AS-RECEIVED AND ACID TREATED CARBON NANOTUBES. Campus Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1276