Back to search

Michigan Technological University

Exploring Rapid Solidification and Equal Channel Angular Pressing in the Fabrication of Mg-Based Alloys for Medical Applications

Abstract

dc:description.abstract

The development of magnesium bioresorbable implants has become increasingly popular due to the increased need for temporary implants and magnesium’s excellent biocompatibility and suitable elastic modulus. Even though magnesium is an excellent candidate, when alloyed with other metals magnesium’s corrosion rate becomes too rapid for bioresorbable medical applications. The investigation into novel processing techniques to control the formation of precipitates to improve mechanical strength and ductility as well as corrosion rates has become of interest. This work investigates the combination of two nonequilibrium processing techniques, rapid solidification (RS) and equal channel angular pressing (ECAP), and the effects it has on the strength, ductility, and corrosion properties of two Mg-Zn-Ca-Mn alloys: Mg-1.2Zn-0.8Ca-0.2Mn and Mg-1.8Zn-0.8Ca-0.2Mn. In the course of this study, it was found that the formulated alloys possessed flaws from processing responsible for a premature mechanical failure of samples. As the result, alloys’ ductility improvements from processing could not be explored. Additionally, ECAP processing caused the dynamic precipitation of nano-size Ca­2Mg6Zn3 precipitates which contributed to an increase in strength from the RS consolidated state after ECAP was performed. Corrosion testing also determined that ECAP caused an increase in corrosion rate of formulated alloys.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tom, Emily
Committee members dc:contributor.committeemember
  • Stephen Kampe
  • Dan Seguin
Contributors dc:contributor
  • Jaroslaw Drelich

Subjects

dc:subject × 8

Rights

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tom, Emily. Exploring Rapid Solidification and Equal Channel Angular Pressing in the Fabrication of Mg-Based Alloys for Medical Applications. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/1309