Back to search

Michigan Technological University

OPTIMIZING THE EXTRUDABILITY OF 6082 ALUMINUM BY VARYING THE MAGNESIUM AND SILICON CONCENTRATION

Abstract

dc:description.abstract

Alloy 6082 aluminum is used for high-volume manufacturing in the automotive industry due to its high strength, impact performance, and corrosion resistance. However, given these improved properties, the alloy has decreased formability compared to other 6xxx series alloys, especially in the extrusion process. Controlling the dynamic recovery and recrystallization properties by changing the additions of Mg and Si can improve the hot deformation properties. Five alloys of varying Mg and Si concentrations between 0.6 to 1.2wt% Mg and 0.7 to 1.3wt% Si were made with constant concentrations of Cr, Fe, and Mn and the same homogenization heat treatment. The proposed alloys are tested using hot compression to identify the activation energy for hot deformation at temperatures of 400℃, 450℃, and 500℃ with strain rates of 0.1s-1, 0.01s-1, and 0.001s-1. The resulting compression samples are analyzed using EBSD to identify the fraction recrystallized. The results show that increasing Mg from 0.6 to 1.2wt% decreases the activation energy from 262 to 220 kJ/mol. In contrast, increases in Si from 0.7 to 1.3wt% decreased the recrystallization fraction and increased activation energy from 262 to 292 kJ/mol. An optimal composition range was identified to be a ratio of Mg to Si between 0.8 and 1, as all alloys close to this ratio had low recrystallized fractions and activation energies compared to other alloys tested for the select temperature and strain rate conditions.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Harma, Eli A.
Committee members dc:contributor.committeemember
  • Walter Milligan
  • Stephen Kampe
  • David Labyak
  • Douglas Swenson
Contributors dc:contributor
  • Paul Sanders

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Harma, Eli A.. OPTIMIZING THE EXTRUDABILITY OF 6082 ALUMINUM BY VARYING THE MAGNESIUM AND SILICON CONCENTRATION. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/1612