Back to search

Michigan Technological University

Investigation of Operational Parameter Differences between the Standard RON Test Method and Knock-Limited Modern Spark-Ignition Engine Operation

Abstract

dc:description.abstract

Octane numbers (ONs) are used worldwide to rate the knock propensity of gasoline-like fuels for spark-ignition engines, making ONs the leading indicator of fuel quality for commercial distribution. The ONs were established 90 years ago and have only received minor changes compared to significant advancements in modern engine operation and fuel composition. This has resulted in discrepancies between knock-limited modern engine operation and standard ON ratings. This dissertation used a standard CFR octane rating engine at Argonne National Laboratory that was instrumented with modern combustion research tools to investigate key differences between the Research Octane Number (RON) rating conditions and modern knock-limited engine operation. The D1 Detonation Pickup as part of the standardized knockmeter system was able to quantify high-frequency pressure oscillations associated with knocking combustion. On the contrary, the subsequent signal conditioner attenuated all high-frequency signal content rendering the standard knockmeter system for octane ratings blind to knocking cylinder pressure oscillations. Instead, the knockmeter system was found to rate the knock area above the cylinder pressure of knockpoint, which is associated with knocking combustion but does not quantify high-frequency pressure amplitudes. The high-frequency pressure amplitudes can be used to differentiate between highly aromatic and highly paraffinic fuels, and furthermore indicate the fuel RON-MON sensitivity. A shift to stoichiometric operation and oscillations amplitude-based knock threshold better represents modern knock-limited engine operation but only resulted in mediocre correlations to RON. A modified RON rating was developed to compensate for the increased heat of vaporization (HoV) and subsequent shift in volumetric efficiency of alcoholic blends, which showed a much-reduced effective RON rating without their HoV advantage. A toluene standardization fuel-based bracketing procedure was developed for octane ratings exceeding 100 to replace toxic tetraethyl lead and rate fuels within the reproducibility limits of the standard RON method. A novel Supercharged Octane Number (SON) was developed to better replicate cylinder pressure-temperature conditions of modern boosted SI engines, which improved the correlation over standard RON. Further improvements were found when incorporating the novel SON and RON as interpolation boundaries for an updated Supercharged Octane Index, which enhanced the correlation over the conventional Octane Index.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Mechanical Engineering-Engineering Mechanics (PhD)
Level thesis:degree_level
Open Access Dissertation
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hoth, Alexander
Committee members dc:contributor.committeemember
  • Wolfram Gottschalk
  • Rebecca G. Ong
Contributors dc:contributor
  • Scott A. Miers
  • Christopher P. Kolodziej

Subjects

dc:subject × 10

Rights

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hoth, Alexander. Investigation of Operational Parameter Differences between the Standard RON Test Method and Knock-Limited Modern Spark-Ignition Engine Operation. Open Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1757