Back to search

Michigan Technological University

High Temperature Strength Reduces Soldering In Aluminum High Pressure Die Casting

Abstract

dc:description.abstract

Die soldering, an adhesion defect in high pressure die casting (HPDC), is a symptom of localized sticking where a localized portion of the cast material is adhered to the tooling surface causing build up over time. This requires the tooling to be serviced which incurs additional costs to the process that gets passed on to the parts. Historically, soldering has been mitigated using lubricants, coatings, and alloy chemistry modifications but solder persists. The Tresca friction thermomechanical model suggests soldering occurs when the local interfacial shear stress between the casting and die surface exceeds the local shear strength of the casting. The ratio of these shear strengths, as a function of temperature, has been shown to predict solder. Research up to this point has focused on reducing the friction coefficient, and in turn the interface shear strength, with no work done on the strengthening of the castings regarding solder. Chemistry of the alloy has been shown to influence soldering behavior, but for the wrong reason as Al-Fe intermetallics are the commonly accepted soldering mechanism. High temperature strengthening mechanisms through chemistry modifications were investigated to support the Tresca friction model. First, the improvement of the solid solution and Orowan strengthening mechanisms was quantified for several aluminum HPDC alloys through the addition of magnesium, improving the hot shear strength of the alloys. Next, the improved alloy shear strength was applied to the Tresca model and tested using a laboratory scale permanent mold designed to solder along with a full scale HPDC production trial with results pointing towards a new soldering mechanism. Finally, the relationship between solder and the casting surface chill zone or “skin” is examined and discussed.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Materials Science and Engineering (PhD)
Level thesis:degree_level
Open Access Dissertation
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Belke, Jacob A.
Committee members dc:contributor.committeemember
  • Alexandra Glover
  • Walter Milligan
  • Gregory Odegard
Contributors dc:contributor
  • Paul Sanders

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Belke, Jacob A.. High Temperature Strength Reduces Soldering In Aluminum High Pressure Die Casting. Open Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1734