Back to search

Michigan Technological University

ADDITIVE MANUFACTURING AND CHARACTERIZATION OF CONDUCTIVE NANOMATERIALS AS ELECTROCHEMICAL ACTUATORS

Abstract

dc:description.abstract

Actuators are widely used in many medical devices for a variety of surgical purposes. These actuators are also applicable in many prosthetic devices, and they are fabricated in a range of sizes depending on their usage. Also, they have different types of actuating mechanisms. Here, we investigate an electrochemical mechanism for an actuator for potential use in medical devices, and this mechanism is achieved using a nanocomposite. Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is used as the polymer matrix with carbon nanotubes (CNTs) as a nanomaterial additive. This PEDOT:PSS and CNTs nanocomposite is used to 3D print filaments, which are then characterized for electrochemical and mechanical properties. The ink was prepared by mixing aqueous PEDOT:PSS solution with CNTs. CNTs were first mixed with a surfactant - Triton X-100 - for dispersion by ultrasonication with a probe-sonicator. Also, dimethyl sulfoxide was added to PEDOT:PSS to give the solution a gel-like texture. The ink was loaded in a syringe, attached to the 3D printer, and filaments were printed at different pressures and speeds. To evaluate the electrical and structural properties, characterization tests were performed. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were performed to obtain capacitance and resistance of the printed filaments. Furthermore, linear actuation tests were performed to determine the strain developed in the printed filaments. Voltage ranging from -1.2V to 1.2V was passed through the filaments immersed in an electrolytic solution for all the tests. A 0.5 mN of force was applied for the linear actuation tests in the filament. The study showed the significance of printing conditions, especially printing speed, in the specific capacitance of the printed filaments, likely due to the alignment of CNTs in the printing direction. Another influential factor was the width of the printed filaments. Thinner filaments appeared to have higher specific capacitance and lower values of impedance multiplied by surface area/mass. A larger portion of CNTs in thinner filaments is influenced by the shear forces applied by the nozzle, which is likely the reason for the effect of filament width. This work could serve as a guideline for fabricating capacitors and actuators with better performance for a wide range of applications.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Campus Access Master's Thesis
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sathaye, Pranav R.
Committee members dc:contributor.committeemember
  • Fei Long
  • Patricia Heiden
Contributors dc:contributor
  • Parisa Pour Shahid Saeed Abadi

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sathaye, Pranav R.. ADDITIVE MANUFACTURING AND CHARACTERIZATION OF CONDUCTIVE NANOMATERIALS AS ELECTROCHEMICAL ACTUATORS. Campus Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/1724