Michigan Technological University
DESIGN, TESTING AND NEURAL NETWORK MODELING OF A LOW-FRICTION WAVE ENERGY CONVERTER TESTBED
Abstract
dc:description.abstractPoint absorber wave energy converters (WECs) transform water wave kinetic energy into other useful forms, typically electrical. While it’s possible to extract energy from passive WECs, more energy can be captured using active control where its power take-off (PTO) acts as both a generator and an actuator. Control strategies usually require accurate models often obtained during model-scale testing. Unfortunately, friction can dominate the dynamic response in small WEC models. A frictionless point absorber WEC testbed is described in this report which allows the researcher to focus on fundamental hydrodynamic behavior instead of friction. It uses air bearings for vertical motion stabilization and a voice coil for the PTO. An embedded load cell provides real-time PTO force information and a laser sensor is used for noncontact displacement measurement. The voice coil has a nonlinear relationship between force, current, and displacement and is modeled using a neural network. The results of a typical use case are provided illustrating its end-to-end operation.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Mechanical Engineering (MS)
- Level thesis:degree_level
- Open Access Master's Report
- Discipline thesis:degree_discipline
- Department of Mechanical Engineering-Engineering Mechanics
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Bhardwaj, Vasu
- Committee members dc:contributor.committeemember
-
- Jungyun Bae
- V. V. N. Sriram Malladi
- Contributors dc:contributor
-
- Gordon Parker
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Identifier
- https://digitalcommons.mtu.edu/etdr/1767