Back to search

Michigan Technological University

IMPROVED LONGEVITY OF ORTHOPEDIC IMPLANTS BY ADHESION OF PARYLENE C TO TITANIUM ALLOY PASSIVATION LAYERS VIA THE MULTICOMPONENT APPROACH TO SOLID SURFACE ENERGY

Abstract

dc:description.abstract

The purpose of this investigation is to determine the suitability of existing approaches to solid surface energy in increasing the adhesion of Parylene C to titanium, as well as some novel approaches. In transitioning from metal to metal oxide during passivation, the surface changes from one in which only dispersion forces are possible to one in which dispersive and either polar or acid-base forces must be present. Matching these components of the surface/interfacial energy as a means of maximizing the work of adhesion have been made in both academic and technical literature. Yet, few studies have attempted to connect multicomponent surface energy measurements with adhesion, and certainly not for the Parylene C-titanium system. Here, it is hypothesized that the titanium surface can be controlled through the partial pressure of oxygen in passivation or pretreatment to increase the work of adhesion (and thereby the practical adhesion) to Parylene C. This work begins with the careful characterization of the heat of fusion of Parylene C, which is currently missing from the literature. It is anticipated that this value will be highly valuable to researchers working with this material, as it enables the determination of the degree of crystallinity through simple differential scanning calorimetry (DSC) experiments. Next, non-trivial measurements of the multicomponent surface energy of both the adherend (titanium) and the coating (Parylene C) are taken under differing conditions of annealing and passivation/pretreatment, respectively. Finally, the application of contact angle (CA) measurement for calculating surface energy and electrochemical impedance spectroscopy (EIS) for coating adhesion and delamination is used to test the hypothesis and evaluate existing multicomponent approaches to adhesion. Additionally, the polarizability approach of Carré is also considered and then extended in what has been herein termed “Bidirectional Carré.” Results indicate that is extension may be as predictive as traditional surface energy models.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Materials Science and Engineering (PhD)
Level thesis:degree_level
Campus Access Dissertation
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Graham, Matthew T.
Committee members dc:contributor.committeemember
  • Stephen L. Kampe
  • Joshua J. Mueller
  • Kathryn A. Perrine
Contributors dc:contributor
  • Jaroslaw W. Drelich

Subjects

dc:subject × 16

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Graham, Matthew T.. IMPROVED LONGEVITY OF ORTHOPEDIC IMPLANTS BY ADHESION OF PARYLENE C TO TITANIUM ALLOY PASSIVATION LAYERS VIA THE MULTICOMPONENT APPROACH TO SOLID SURFACE ENERGY. Campus Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/1996