Back to search

Michigan Technological University

MEASUREMENT OF WAVE ELEVATION USING PIEZO-ELECTRIC HYDROPHONE

Abstract

dc:description.abstract

Water surface waves exert a pressure oscillation that decreases with depth. Pressure measurements can be used to estimate wave elevation and frequency, which can then be used to (1) implement feedback for wave energy converter control strategies and (2) quantify the potential for converting waterbed pressure fluctuations into electrical energy. This report examines the use of an off-the-shelf piezo-electric hydrophone to estimate wave elevation from pressure data. Experiments were carried out in a wave tank with various wave amplitudes, frequencies, and hydrophone depths. Wave gauges, with a resolution of $\pm 0.5$ mm, measured the wave height above the hydrophone. The accuracy of the wave elevation estimates was found to depend on frequency but was unaffected by the hydrophone’s depth. This frequency dependence was not related to the hydrophone’s frequency response. A likely cause was the exponentially decreasing pressure and the subsequent reduced hydrophone signal, approaching its noise floor.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Open Access Master's Report
Discipline thesis:degree_discipline
Department of Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hobbs, Ace D
Committee members dc:contributor.committeemember
  • Chad M. Walber
  • Jim DeClerck
Contributors dc:contributor
  • Gordon G. Parker

Subjects

dc:subject × 3

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hobbs, Ace D. MEASUREMENT OF WAVE ELEVATION USING PIEZO-ELECTRIC HYDROPHONE. Open Access Master's Report thesis, https://doi.org/10.37099/mtu.dc.etdr/2105