Back to search

Michigan Technological University

METHODOLOGY DEVELOPMENT FOR EVALUATING RELATIVE HEAT CHECKING RESISTANCE OF OPEN-DIE FORGE TOOLING

Abstract

dc:description.abstract

Heat checking, characterized by biaxial networks of surface cracks induced by thermomechanical cycling, can cause premature failure of open-die forge tooling. To facilitate the evaluation of heat checking resistance of die steels, a simulation‑informed out-of-phase thermomechanical fatigue (OP-TMF) testing methodology was developed using 4330V steel as a baseline material. Temperature‑dependent material properties and flow stress data were collected and compiled into a material data file for use with finite element analysis software. Forging and cooling scenarios were simulated across a range of die preheat temperatures. Temperature and in-plane strain histories extracted from the die surface provided a foundation for laboratory OP-TMF profile construction. Iso-strain OP-TMF experiments were performed in a Gleeble 3500 thermomechanical simulator. Predicted stress evolution was successfully reproduced. Peak tensile stress data from load‑displacement hysteresis loops were used to construct stress-cycle curves, providing a quantitative metric for comparison of heat checking resistance. This work establishes a high-fidelity framework for rapid assessment of heat checking resistance in open-die forge tooling materials, enabling improved die steel selection and process optimization.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Schaller, Jack F.
Committee members dc:contributor.committeemember
  • Walter Milligan
  • Pat Nowak
Contributors dc:contributor
  • Joshua Mueller

Subjects

dc:subject × 5

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Schaller, Jack F.. METHODOLOGY DEVELOPMENT FOR EVALUATING RELATIVE HEAT CHECKING RESISTANCE OF OPEN-DIE FORGE TOOLING. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/2182