Back to search

NJIT

Automobile air bag inflation system using pressurized carbon dioxide

Abstract

dc:description.abstract

A novel air bag inflator based on the evaporation ofliquefied carbon dioxide was developed. A detailed qualitative model wasestablished on the basis of an extensive experimental study. An integratedquantitative model of this inflator was constructed. The system was studied by discharging the inflatorinto a tank and measuring pressure and temperature evolution (0-50 ms). Thedispersion of the two-phase spray duringinflation was investigated by high-speed cinematography. The optimal storage pressure of the liquid CO_2was found to be 2000 psig (at 22 C). Two distinct inflator behaviors wereidentified. First, at conditions corresponding to an initial entropy below the critical point, atwo-phase evaporating spray was ejected from the inflator into the tank. Second, at an initial entropy above thecritical point, the inflationsequence constituted the expansion of a real gas without a significant phase transformation. The minimal flow section in thenozzle was found to control the dynamicsof this new inflator. To prevent the formation of solid CO_2during inflation, small amounts of organic liquids were added to the inflator. A significant increase in tanktemperature was observed, resultingin a profound improvement in performance. An explanation for the influence of organic liquids was developed based ona 'layered evaporation model'. The qualitative model was based on the interactionof the flashing process with thetwo-phase outflow from the inflator. This interaction was manifested in twodifferent waves, namely a forerunnerand an evaporation wave which controlled the evacuation of the two-phase mixture from the inflator. The latterwas predominantly dispersed accordingto classical atomization mechanisms. The generated droplets evaporated partially by consuming their own internal energyand by interacting with tank gases. The characteristics of the condensate were evaluated by a detailedthermodynamic analysis. The quantitative description of the inflatorinvolved the development of a transientone-dimensional, two-fluid model. Preliminary simulations show excellent agreement with the expected results. The tank modelwas formulated on the basis of an empiricalcorrelation for the atomization process, coupled with a simple droplet evaporation model, followed by a model for themixing of real gases.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Mechanical Engineering - (Ph.D.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Adams, Bart
Contributors dc:contributor
  • Mohamed E. Labib
  • Rong-Yaw Chen
  • Pasquale J. Florio

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/dissertations/939

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Adams, Bart. Automobile air bag inflation system using pressurized carbon dioxide. https://digitalcommons.njit.edu/dissertations/939