Back to search

NJIT

Characterization and fabrication of a (6H)-SiC as a piezoresistive pressure sensor for high temperature applications

Abstract

dc:description.abstract

A prototype monolithic 6H-SiC pressure sensor operational up to 350 C, with potential to operate up to 600 C, was batch fabricated and tested. At temperatures higher than 450 C, silicon diaphragms creep under minimal load. To operate beyond 450 C, therefore, the use of 6H-SiC was proposed. However, three key technological issues - fabrication, high temperature metallization, and gage factor characterization - had to be resolved. Since conventional fabrication technology is not applicable to SiC due to its near inert chemistry, photoconductive selectivity techniques to etch the piezoresistors were developed. Techniques to wet etch the cavities in a dark current mode were developed, resulting in 25 um diaphragms free of etch-pits and hillocks. Average etch-rates between 0.6 and 0.8 um/min were achieved. Ti/TiN/Pt and Ti/TaSi_2/Pt multilayer metallization schemes that maintained stable contact resistivity on n-type 6H-SiC epilayers after more than twenty hours of heat treatment at 600 C in air were demonstrated. The characterization research revealed that the longitudinal and transverse gage factors were 22 and 19, respectively, at room temperature. They increased in absolute values with temperature, and then assumed constant values of 11 and 9, respectively, above 400 C. The experimental data obtained demonstrated for the first time that 6H-SiC pressure sensors capable of operating up to 600 C can be fabricated and manufactured.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Electrical Engineering - (Ph.D.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Okojie, Robert Sylvester
Contributors dc:contributor
  • William N. Carr
  • Roy H. Cornely
  • Robert Boris Marcus

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/dissertations/997

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Okojie, Robert Sylvester. Characterization and fabrication of a (6H)-SiC as a piezoresistive pressure sensor for high temperature applications. https://digitalcommons.njit.edu/dissertations/997