Abstract
dc:description.abstractAntennas presently being used for vehicular military VHF communications are narrowband. New generation frequency hopping radios, however, require broadband antennas. The antenna must be base isolated in order to reduce undesirable pattern nulls and impedance variations caused by currents induced on the support structure. Physical constraints limit the antenna length to three meters while operating from a frequency of 30 MHz to 88 MHz. To satisfy the above requirements a model of a broadband, base isolated, cylindrical antenna less than three meters long was analyzed and built. Equations for the current distribution as a function of the physical parameters were formulated and solved. The antenna selected as most optimum, i.e., maximum gain on the horizon, was 2.5 meters in length and fed 1.0 meters above the mounting surface. The most optimum base isolation network consisted of a coaxial cable choke wound on a ferrite toroid. The cable choke was made resonant at 25 MHz with minimum distributed capacity. The equalizer network for this antenna was located at the feed-point. Several network configuration were examined before selecting a two-pole T-network and autotransformer. The equalizer network reduced the antenna VSWR to 7:1. A 2 dB attenuator is required to reduce this VSWR to an acceptable 3.5:1.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Engineering Science in Electrical Engineering
- Discipline thesis:degree_discipline
- Electrical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Cunningham, Peter Edward
- Contributors dc:contributor
-
- Gerald Martin Whitman
- Roy A. Plastock
- Joseph Frank
Subjects
dc:subject × 5Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/dissertations/1278