Back to search

NJIT

Data multiplexing in vector acoustic communication: system design and experiments

Abstract

dc:description.abstract

<p>Acoustic particle velocity channels, which are vector components of the acoustic field, have been recently explored to achieve communication purposes underwater. Vector sensors and transducers that can utilize acoustic particle velocity channels have compact multichannel designs, which are perfect for compact size underwater platforms. In this dissertation, an underwater acoustic multiple-input multiple-output (MIMO) communication system featuring orthogonal frequency division multiplexing (OFDM) and frequency shift keying (FSK) modulation is discussed. By transmitting multiple independent data streams simultaneously over several channels within the same bandwidth, the proposed MIMO system increases the transmission rate. A variety of components of the system such as vector transducers and algorithms for synchronization, channel estimation, MIMO detection, channel coding, etc., are designed and implemented. Parameters of acoustic particle velocity channels and system performance are measured and studied via experimental data for various conditions and configurations, to understand the performance of the developed vector MIMO system.</p><p>On the other hand, wireless data communication and telemetry during drilling deep oil and gas wells are important enablers for safe and timely drilling operations. The transmission of information through drill strings and pipes using sound waves is a useful and practical approach. However, given the limited available bandwidth, transmission rates are typically smaller than what is needed. In this dissertation, a new method and system are proposed to increase the transmission rate over the same bandwidth, by deploying more than one actuator. Upon using multiple actuators, several data streams can be transmitted simultaneously. This increases the data rate without the need for additional bandwidth. The experimental results of a testbed with two actuators are presented, where the transmission rate is doubled with no bandwidth increase. A strain sensor receiver and accelerometer receivers are used to separate and demodulate the two data streams. It is demonstrated that it is possible to recover the data in the new faster system benefiting from two actuators, while having about the same bit error probability performance as a one-actuator system. Various combinations of strain and acceleration sensors are considered at the receive side. Due to some properties of strain channels (e.g., smaller delay spreads and their less-frequency-selective behavior) presented in this dissertation, it appears that a strain sensor receiver and an accelerometer receiver together can offer a good performance when separating and demodulating the two actuators' data in the testbed. Overall, the experimental results from the proposed system suggest that upon using more than one actuator, it is feasible to increase the data rate over the limited bandwidth of pipes and drill strings.</p>

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Electrical Engineering - (Ph.D.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhang, Erjian
Contributors dc:contributor
  • Ali Abdi
  • Alexander Haimovich
  • Joerg Kliewer

Subjects

dc:subject × 8

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/dissertations/1765

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Zhang, Erjian. Data multiplexing in vector acoustic communication: system design and experiments. https://digitalcommons.njit.edu/dissertations/1765