Back to search

NJIT

Engineered porous structures for propellants using additive manufacturing

Abstract

dc:description.abstract

<p>Foamed polymers are widely used today for shock absorption and packaging materials to prevent damage to their contents. Typical foamed densities vary from 0.1 g/cm<sup>3</sup> to 0.4 g/cm<sup>3</sup> depending on the polymeric materials used. There is a need to explore foaming densities above 0.4 g/cm<sup>3</sup> for propellants with highly engineered surface area progression for increased combustion performance. One way to achieve this is through highly controlled and engineered graded foam structures. To further exploit this approach, additive manufacturing coupled with a tunable means to generate foamed structures is the target of this work. To generate foam structures without the use of pressure or elevated temperature, alternate means of foaming are required. Vat-photopolymerization processing allows varying polymerization parameters per layer which one can introduce by implementing a novel foaming method. The proposed method is to use a photoacid generator (PAG) that relies on photosensitization of diaryliodonium salts via photoredox induced fragmentation mechanism to decompose calcium carbonate (CaCO<sub>3</sub>) at a given wavelength during printing. This work will review the effects of PAG and polymerization kinetics as the foaming occurs. Understanding kinetics and impact on the final foam structure is important. Using these methods would enable highly engineered foam architectures to be generated via an additive manufacturing process. This in turn could enable tailorable gas generation rates to improve piezometric efficiency in gun propulsion performance.</p>

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Materials Science and Engineering - (Ph.D.)
Discipline thesis:degree_discipline
Physics

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Caravaca, Elbert
  • 0009-0003-2663-4773
Contributors dc:contributor
  • N. M. Ravindra
  • Ken Keunhyuk Ahn
  • Omowunmi A. Sadik

Subjects

dc:subject × 9

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/dissertations/1895

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Caravaca, Elbert; 0009-0003-2663-4773. Engineered porous structures for propellants using additive manufacturing. https://digitalcommons.njit.edu/dissertations/1895