NJIT
Development and characterization of composite membranes for use in countercurrent solvent extraction
Abstract
dc:description.abstract<p>Porous membranes having a particular wetting characteristic, hydrophobic or hydrophilic, are used for nondispersive membrane solvent extraction (MSX) where two immiscible phases flow on two sides of the membrane. The aqueous-organic phase interface across which solvent extraction/back extraction occurs remains immobilized on one surface of the membrane. This process requires the pressure of the phase not present in membrane pores to be either equal to or higher than that of the phase present in membrane pores; the excess phase pressure should not exceed a breakthrough pressure. In countercurrent MSX with significant flow pressure drop in each phase, this often poses a problem. In this dissertation, new Janus membranes are developed in order to overcome this problem. The Janus membrane consists of one membrane with two unique sides, one being hydrophobic and one being hydrophilic. Several materials are studied to this end: polyvinylidene fluoride (PVDF), polyamide (Nylon 6,6), polyether ether ketone (PEEK), polypropylene (PP), and polytetrafluoroethylene (PTFE). Two different treatment methods are employed to create the opposite wetting characteristics on each side: a plasma-polymerization treatment and a 2-part treatment of a caustic-potassium hydroxide (KOH) solution followed by an acrylic acid (AA) solution treatment. Both flat membranes and hollow fibers are studied. The Janus membranes are characterized using the contact angle, liquid entry pressure (LEP) and the droplet breakthrough pressure from each side of the membrane along with characterizations via scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Nondispersive solvent extractions are carried out successfully for two systems, octanol-phenol (solute)-water, toluene-acetone (solute)-water, with either flowing phase at a pressure higher than that of the other phase. The phenol extraction system has a high solute distribution coefficient whereas acetone prefers both phases almost identically. The Wilson-plot method is used to characterize the membrane resistances as well as the individual-phase boundary layer resistances for each extraction system. The potential practical utility of the MSX technique will be substantially enhanced via Janus MSX membranes.</p>
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy in Chemical Engineering - (Ph.D.)
- Discipline thesis:degree_discipline
- Chemical and Materials Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Rodrigues, Lydia Neves
- Contributors dc:contributor
-
- Kamalesh K. Sirkar
- Roman S. Voronov
- Boris Khusid
Subjects
dc:subject × 9Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/dissertations/1913