Back to search

NJIT

Modification of biodegradable polyesters with inorganic fillers

Abstract

dc:description.abstract

In attempts to address the growing need of materials with controlled degradation characteristics and good mechanical properties for tissue engineering applications, composites based on biodegradable polymers and a potentially bioactive novel inorganic synthetic filler were produced and characterized. Composites were produced by solution mixing of a commercial polylactic acid, as well as a biodegradable thermoplastic polyester based on butylene adipate/succinate, with synthetic magnesium/aluminum carbonate minerals, known as hydrotalcites. Two types of hydrotalcites, at 30 wto/o filler level, were used: surface coated and uncoated. Composites were also melt-mixed in a twin-screw extruder for comparison. Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and Melt Rheology were used to characterize the unfilled polymers and their composites. Results of long-term degradation data in vitro in a PBS solution are also presented. The polylactic acid composites showed significant differences compared to the unfilled polymers and the copolyester composites. The copolyester composites showed only slight thermal and hydrolytic short and long-term degradation. By contrast, hydrotalcites appear to promote in all cases degradation of the matrix in the polylactic acid composites. During the course of long-term degradation of the polylactic acid and its composites, Elemental Analysis for released Mg and Al ions was performed, as well as measurement of pH changes. Scanning Electron Microscopy was also used to study morphological changes of the composites. Further investigation is needed involving degradation experiments in vivo for the most promising polylactic acid/hydrotalcite composites.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chouzouri, Georgia
Contributors dc:contributor
  • Marino Xanthos
  • Costas G. Gogos
  • Michael Chien-Yueh Huang

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/613

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chouzouri, Georgia. Modification of biodegradable polyesters with inorganic fillers. https://digitalcommons.njit.edu/theses/613