Back to search

NJIT

Dynamic friction measurement, modeling, and compensation for precise motion control

Abstract

dc:description.abstract

In this thesis, measurements of dynamic friction in a hydrodynamic journal bearing were performed for varying sinusoidal velocity excitations, loads, and lubricants. The results indicate that the friction data displays a negative slope in the mixed region of friction vs. velocity (f-v) curves, and also shows that the dynamic friction is not just a function of current velocity, but also a function of velocity history (hysteresis). These results are in agreement with previous experimental investigations by other investigators in lubricated friction. Secondly, a dynamic friction model is fully explored and partially extended to provide quantitative agreement to measured friction values. A contribution to friction modeling was made by reducing the model from a fourth to a second order equation. Parameters were determined for one lubricant and two non-nal loads, and the model output is compared to experimental data. Finally, model-based friction compensation was successfully performed. The dynamic friction model is used as a basis for velocity and position control of an apparatus with high friction by incorporating a function to constantly learn two parameters of the model. Results demonstrate the feasibility of using a rich friction model in real time, and its ability to greatly reduce the tracking errors caused by friction. This thesis was supported by the National Science Foundation under Grant MSS9215636.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cohn, Simon
Contributors dc:contributor
  • Avraham Harnoy
  • Bernard Friedland
  • Zhiming Ji

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/892

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cohn, Simon. Dynamic friction measurement, modeling, and compensation for precise motion control. https://digitalcommons.njit.edu/theses/892