Back to search

NJIT

Computational determination of laminar flow loss coefficients in 90° channel bend

Abstract

dc:description.abstract

Loss coefficients for laminar two dimensional incompressible channel (or duct) flow in a 90 bend are investigated using FEM software, FIDAP. This problem consists of a two dimensional duct with a 90 bend of constant radius flowing with water, at 70 F and atmositeno conditions. The bend radius to duct width ratios examined were 1.5 and 1.0. Both bend radius to duct width ratios were analyzed for Reynolds Number ranging from 50 to 1800. The pressure and velocity distributions were found and used to determine the pressure due to the bend. The results show the pressure loss effect due to the bend as a dimensionless coefficient plotted versus Reynolds Number. It was found that the loss coefficient increases with decreasing Reynolds Number and increases with decreasing bend radius. The loss coefficient values ranged from 0.188 to 1.367 for a bend radius to duct width ratio of 1.5 and varied from 0.498 to 3.929 for a bend radius to duct width ratio of 1.0. These results can be compared with plots of existing pressure loss coefficients for like duct geometry. The results show a similar trend with existing empirical data.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parkin, Leonard Paul
Contributors dc:contributor
  • Rong-Yaw Chen
  • Pasquale J. Florio
  • Pushpendra Singh

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/987

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Parkin, Leonard Paul. Computational determination of laminar flow loss coefficients in 90° channel bend. https://digitalcommons.njit.edu/theses/987