NJIT
Trifluoroiodomethane as an environmentally friendly gas for water patterning by plasma etching process
Abstract
dc:description.abstractTrifluoroiodomethane (CF_3I), a non-global warming gas, has been investigated with study as a substitute for typical CFC etchants, such as CF_4 and C_2F_6, used in wafer pattering technology. This investigation was carried out by exposing dielectric films of silicon oxide (SiO_2) and silicon nitride (Si_3N_4) in CF_3I and C_2F_6/O_2 (used as a reference) plasma environments. The etch rate of these films was ascertained as function of applied rf power, etchant gas flow rate, reaction chamber operating pressure, and O_2 to CF_3I ratio. Upon increasing power, the etch rates of SiO_2 and Si_3N_4 by both CF_3I and C_2F_6/O_2 were increased. The study of flow rate showed various results depending on types of etchants and dielectric film materials. According to the processing conditions, there were two limits in etching with CF3I. First, at the pressure higher than 50 mTorr, etching of' Si3N4 can produce polymer film on sample surface. Secondly, at O_2/CF_3I ratio higher than 0.17, etching of both dielectric films can result in generating reddish particles all over the sample and the reaction chamber side wall.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Engineering Science- (M.S.)
- Discipline thesis:degree_discipline
- Committee for the Interdisciplinary Program in Materials Science and Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Aryusook, Krit
- Contributors dc:contributor
-
- Roland A. Levy
- Lev N. Krasnoperov
- Vladimir Zaitsev
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/994