Back to search

NJIT

Synthesis and characterization of hafnium carbide thin films

Abstract

dc:description.abstract

Hafnium carbide thin films of various characteristics were deposited on silicon substrates using dc magnetron sputtering. A HfC target was used as a sputtering source and Ar was used as a sputtering gas during deposition. The variables investigated were total sputtering gas pressure and power. Optimum characteristics were achieved with a total sputtering gas pressure of 5 mTorr and power of 200 W. No evidence for oxidation of the film was found at a depth below 400A for deposited and annealed films. Binding characteristics were obtained from ESCA data. The compressive film stress increased when sputtering gas pressure decreased. The lowest HfC film resistivity achieved was 210 u[Omega]-cm. This resistivity was obtained by using a low sputtering gas pressure. High power reduced film resistivities. Very low base pressures and cycling of chamber were found to lower the resistivity. Annealing of HfC deposited film reduced the stress and resistivity by approximately 10%.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering - (M.S.)
Discipline thesis:degree_discipline
Committee for the Interdisciplinary Program in Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Thongruang, Wiriya
Contributors dc:contributor
  • Roland A. Levy
  • Robert Boris Marcus
  • Trevor Tyson

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1043

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Thongruang, Wiriya. Synthesis and characterization of hafnium carbide thin films. https://digitalcommons.njit.edu/theses/1043