Back to search

NJIT

Dynamic mechanical analysis of particulate dental composites

Abstract

dc:description.abstract

Typically, dental composites are used in different configurations and situations. When a cavity forms at the occlusal surface of a posterior tooth, a class I and class II filling is used, depending on the extent and nature of the cavity formed. These fillings have to be designed to resist mechanical abrasion and occlusal stress during chewing, bruxing and other tooth functions. Class IV fillings are also designed to resist biting stress. In these applications composites with high filler loading with filler particles of size >0.6um are used. These composites are typically known as minifill or midifill composites. When more than one particle size range is used, they are also refereed to as hybrid composites. When the restorations are prepared on interior tooth surfaces not subject to direct application of occlusal or biting stresses (e.g., class III and class V fillings), the composites are designed with less emphasis on the abrasion resistance and mechanical properties of the composites. Typically, microfill composites with limited filler loading of colloidal silica (of 0.4p.m size) is used for such applications. It has been reported in recent years that these fillings must be designed to flex with tooth function and hence should possess lower modulus of elasticity. The posterior restorations, on the other hand, must be sufficiently stiff to resist masticatory stresses. For these reasons, dynamic mechanical properties of minifill/midifill and microfill composites need elucidation. The dynamic mechanical response is best studied under flexural mode of dynamic deformation. Among the properties considered important for composite resins are viscoelastic properties such as storage modulus (E'), loss modulus (E") damping, glass transition, etc. In this study dynamic mechanical analysis using flexural mode of deformation in the temperature range of -50 to 180 C has been used to characterize the viscoelastic properties of four composites at 37 C with visible light cure. The results indicate that hybrid composites have higher viscoelastic properties than the microfill system. The resin is characterized by higher storage modulus mode and loss modulus across the entire range of temperature investigated. The results indicate that the filler loading and cross linking effects may be responsible for the variation of viscoelastic properties as a function of different variables (e.g. filler loading, particle size).

Degree

thesis:*
Name thesis:degree_name
Master of Science in Engineering Science- (M.S.)
Discipline thesis:degree_discipline
Committee for the Interdisciplinary Program in Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parekh, Minu
Contributors dc:contributor
  • Jaya Vaidyanathan
  • David S. Kristol
  • Richard Clyde Parker

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1112

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Parekh, Minu. Dynamic mechanical analysis of particulate dental composites. https://digitalcommons.njit.edu/theses/1112