Back to search

NJIT

Design and fabrication of a miniature pressure sensor head using direct bonded ultra-thin silicon wafers

Abstract

dc:description.abstract

A miniature pressure sensor head is designed and fabricated using an ultra-thin silicon membrane directly bonded to an excimer laser micromachined substrate. The pressure sensor head has its intended implementation as part of an optically interrogated device with sensitivity to pressures ranging from 0.5 to 4.0 MPa. The pressure range design is shown to be easily adjusted by tailoring the thickness of the membrane wafer. The fabrication process features numerous advantages over existing pressure sensor construction technology including a maskless procedure and no chemical etching or mechanical thinning necessary to form the membrane after bonding. An optic lever is constructed and tested using a reflective aluminum surface. The response of the optic lever device was found to be 160 mV/um in the linear region.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Applied Physics - (M.S.)
Discipline thesis:degree_discipline
Physics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Statler, Chad Eugene
Contributors dc:contributor
  • Kenneth Rudolph Farmer
  • John Francis Federici
  • William N. Carr

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1125

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Statler, Chad Eugene. Design and fabrication of a miniature pressure sensor head using direct bonded ultra-thin silicon wafers. https://digitalcommons.njit.edu/theses/1125