Back to search

NJIT

Fabrication of micron-sized mirror/cantilever silicon devices for crosspoint switching arrays

Abstract

dc:description.abstract

This thesis describes the fabrication of micron-sized vertical mirrors at the end of horizontal cantilevers, that are electrostatically controlled. The mirrors, 40x 40 um with thicknesses of 1.5-6 um, were made by using the etch resistance to 40% KOH etchant of <111> planes and oxide stripes. The cantilever beams, 100 to 350 um long and 0.44 to 0.81 um thick, were fabricated using the etch resistance of heavily doped boron layers to 10% KOH at 50 C. Two technologies to introduce the boron layers were investigated. The ion implantation approach was based on thick oxide/photoresist masking. A maximum doping of 2.5 x 1020 cm-3 was achieved in a layer of about 0.83 p.m. This doping level resulted in 0.44 um thick cantilevers after 2 hours etching to remove 40 um of silicon under the cantilevers. Using Spin On Doped Glass (SOG) technology, a higher doping concentration was achieved, 5 x 1020 cm-3 in a layer of 1.9 um. After etching 2.06 hours to remove 26 um of silicon, the etched cantilevers were 0.81 um. Two masking methods for the SOG technique were investigated. The thick (40 um) positive photoresist method had a problem of chemical reaction between the photoresist and the spun on doped glass. The other method, which used thin negative photoresist, was more promising. Problems related to the partial etching of the mirrors due to the incomplete SOG wetting of the mirrors' sidewalls, and proximity photoresist exposure effects, can be overcome with additional experimental work.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abdel-Aziez, Yasser A.
Contributors dc:contributor
  • Roy H. Cornely
  • Robert Boris Marcus
  • Edip Niver

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1237

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Abdel-Aziez, Yasser A.. Fabrication of micron-sized mirror/cantilever silicon devices for crosspoint switching arrays. https://digitalcommons.njit.edu/theses/1237