Back to search

NJIT

Wear and friction of titanium nitride on ultra high molecular weight polyethylene under oscillating motion for evaluation of use in articulating orthopedic applications

Abstract

dc:description.abstract

Materials are a factor in the performance of articulating orthopedic implants. An oscillating tribometer is utilized to investigate mechanisms of wear and friction of TiN (titanium nitride) coated on Ti-6Al-4V (titanium) alloy against UHMWPe (ultra high molecular weight polyethylene). Three thicknesses of TiN coating (1.76 pm, 4.15 um, and 10.5 um) are used to evaluate the performance of each in UHMWPe wear reduction and coating integrity. An uncoated Co-Cr (cobalt chromium) coupon is used against UHMWPe pins for control purposes. Oscillations are carried out to 10 million cycles to discover and evaluate short- and long-term wear mechanisms. Mass differentials and torque are recorded for each test at specific intervals in order to establish wear volumes and rates of the UHMWPe, and coefficients of friction. Profilometries and polarized light photomicrography are performed at test conclusion to observe any alteration in physical condition which occurred during each test. Analysis of the results reveals the benefit of reduced wear from a TiN/Ti-6AI-4V coating-substrate system coupled with UHMWPe. Use of TiN/Ti-6Al-4V enables a reduction in abrasive wear and a reduction and delay in the onset of adhesive wear and associated UHMWPYTe transfer films. UHMWPe wear decreases with thinner TIN coatings, realizing up to two-thirds reduction in wear over a Co-Cr-UHMWPe system. Even with a rougher surface a TiN-UHMWPe system (pre-test Ra = 0.07-0.11) benefits with a minimum of one-third reduction in UHMWPe wear over the smoother Co-Cr-UHMWPe system (pre-test Ra = 0.03).

Degree

thesis:*
Name thesis:degree_name
Master of Science in Biomedical Engineering - (M.S.)
Discipline thesis:degree_discipline
Biomedical Engineering Committee

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jacobson, David Scott
Contributors dc:contributor
  • Michael Pappas
  • David S. Kristol
  • Clarence W. Mayott

Subjects

dc:subject × 8

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1267

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Jacobson, David Scott. Wear and friction of titanium nitride on ultra high molecular weight polyethylene under oscillating motion for evaluation of use in articulating orthopedic applications. https://digitalcommons.njit.edu/theses/1267