Back to search

NJIT

Design and analysis of movable boundary allocation protocol

Abstract

dc:description.abstract

The increasing digital communications traffic will require very high speed networks. The use of high communication speed increases the ratio between end to end propagation delay and the packet transmission time. This increase causes rapid performance deterioration and restricts the utilization of the high system bandwidth in broadcast channel based systems. Using several parallel channels in place of a single channel improves this ratio. For a given system bandwidth the total system capacity is increased by bandwidth division and parallel communication. FTDMA protocols have been suggested for the parallel channel network and these protocols are suitable for different loads. In this thesis, the movable boundary allocation protocol has been suggested for the parallel communication architecture. This protocol is suitable for varying loads and yields a better throughput versus delay characteristics. The analysis demonstrates the potential for improvement in the system capacity and the average message delay when compared to conventional single channel system.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sekhri, Karun
Contributors dc:contributor
  • Irving Y. Wang
  • Edwin Hou
  • MengChu Zhou

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1337

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sekhri, Karun. Design and analysis of movable boundary allocation protocol. https://digitalcommons.njit.edu/theses/1337