Back to search

NJIT

Investigation of forces in the course of the water jet--work piece interaction

Abstract

dc:description.abstract

This study is concerned with the dynamic of the interaction between the water jet and the work-piece. The piezoelectric transducer was used to construct an experimental setup. The simultaneous use of the constructed setup and strain gage enables us to validate the experimental procedure. The forces in the impingment zone were measured at different operational conditions. Totally about 400 different combinations of these conditions were tested. It was found that the force is mainly determined by the diameter of the sapphire. The effects of the abrasive size , abrasive flow rate, the diameter of the carbide tube, and the stand-off distance were also determined. The acquired informations will be used to improve the understanding of the mechanism of the jet formation and optimize the condition of cutting.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Li, Hung-Yuan
Contributors dc:contributor
  • E. S. Geskin
  • Avraham Harnoy
  • Lawrence Jay Schmerzler

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1415

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Li, Hung-Yuan. Investigation of forces in the course of the water jet--work piece interaction. https://digitalcommons.njit.edu/theses/1415