Back to search

NJIT

Finite element analysis of the femoral head

Abstract

dc:description.abstract

Femoral component loosening and Prosthetic stem fractures have renewed interest in conservative alternatives to conventional total hip replacements. One such alternative is the concept of surface replacement. The objective in this study is a finite element analysis of a femoral surface replacement cup with Particular attention given to the interfacial stresses. An axisymmetric model with a grid of two-dimensional isoparametric elements is generated. This study utilizes an adaptive model so as to include the effect of bone remodeling in response to stress. The stiffness is considered to be linearly proportional to the stress in the femoral head and neck. Isotropic properties are chosen. The stresses are determined by performing iterative finite element analyses based upon an appropriate variation of the stiffness property in each analysis until the results obtained are within the convergence limit. Plots of stress contours in the femoral head are obtained for the loads acting on the joint during walking.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ramamurthy, Ghandikota
Contributors dc:contributor
  • Michael Pappas
  • Harry Herman
  • Bernard Koplik

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1472

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ramamurthy, Ghandikota. Finite element analysis of the femoral head. https://digitalcommons.njit.edu/theses/1472