Back to search

NJIT

Electrolytic polishing of copper and nickel silver

Abstract

dc:description.abstract

To facilitate the study of surface conditions on ultrasonic weldability, electrolytic polishing was used to obtain four types of surfaces on copper and nickel silver (alloy D). A500 orthophosphoric acid bath was used, and the necessary operating conditions to obtain these surfaces were established. In accordance with current electrolytic polishing theory, the existence of the anode viscous layer and anode surface film was observed, and their role in the polishing process is discussed. By means of metallurgical techniques and surface profile measurements, it is shown that the four types of surfaces are significantly different, and good reproducibility of these surfaces are attainable. Statistical analysis of the data was employed to support the conclusions. As an outgrowth of this experiment, a method for deburring nickel silver contact springs has been established. Electrolytic polishing theory and a comprehensive literature survey relevant to this study are also presented.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abrams, Halle
Contributors dc:contributor
  • C. L. Mantell
  • Michael Frederick
  • Deran Hanesian

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1550

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Abrams, Halle. Electrolytic polishing of copper and nickel silver. https://digitalcommons.njit.edu/theses/1550