Back to search

NJIT

A silicon knife design and fabrication

Abstract

dc:description.abstract

In this thesis, the design and fabrication of a silicon knife is described. The device design is based on the principle of oxidation sharpening. The knife is made from a silicon wafer and can be made to be any chosen length up to 150 mm. It was made with the same basic procedures used in semiconductor chip manufacturing. This type of processing/manufacturing results in a knife with a high degree of sharpness and smoothness compared with existing knife technology. The knife fabrication plan combines IC processing, techniques including anisotropic and isotropic etching of silicon, plasma dry etching and chemical etching dry oxidation, and KOH etching.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wang, Mingli
Contributors dc:contributor
  • Robert Boris Marcus
  • William N. Carr
  • Durgamadhab Misra

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1562

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wang, Mingli. A silicon knife design and fabrication. https://digitalcommons.njit.edu/theses/1562