Back to search

NJIT

Agitation requirements for complete liquid dispersion in liquid-liquid-gas systems

Abstract

dc:description.abstract

A number of studies have been published in the literature on the determination of the agitation intensity at which two immiscible liquids become completely dispersed in mechanically agitated vessels. However, no information is currently available on the agitation intensity required for the complete dispersion of two liquids in the presence of an additional gas phase. Therefore, the main objective of this study was to experimentally determine the minimum agitation speed for complete liquid-liquid dispersion, N_{cd}, in liquid-liquid-gas systems as a function of gas flow rate, impeller type, impeller size, and impeller off-bottom clearance. The minimum agitation speed was first determined visually. In order to eliminate the ambiguity of the visual determination method, a novel observer-free method was developed. This method is based on the analysis of the content of dispersed phase in samples taken from the mixture at different agitation speeds. The results indicate that the values of N_{cd} obtained with the proposed method are in close agreement (within 4%) with those obtained visually. The minimum agitation speed, N_{cd}, was found to be strongly affected by the air sparging rate. Higher agitation speeds were required to attain the complete dispersion state at higher air sparging rates. N_{cd}, was also found to be strongly affected by impeller type, impeller size, and impeller clearance for both gassed and ungassed systems. A mathematical model based on Kolmogoroffs theory of isotropic turbulence was developed to predict the results obtained experimentally under gassed conditions. Provided that the impeller was not flooded, good agreement was found between the experimental values of N_{cd}, and the corresponding values predicted by the model.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering, Chemistry and Environmental Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abu-Hakmeh, Emad Ahmad
Contributors dc:contributor
  • Piero M. Armenante
  • Basil Baltzis
  • Demetri P. Petrides

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1716

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Abu-Hakmeh, Emad Ahmad. Agitation requirements for complete liquid dispersion in liquid-liquid-gas systems. https://digitalcommons.njit.edu/theses/1716