Back to search

NJIT

The removal HCl from hot gases with calcium compounds

Abstract

dc:description.abstract

The use of CaCO_3, Ca(OH)_2, and CaO as adsorbents for removal of HCl from hot gas streams is investigated through a series of experiments. The experiments are conducted to evaluate the influence of key parameters such as temperature, (500 K to 1000 K), particle size, (0.037 mm to 3.36 mm), pressure drop of the packed bed, (0.1 cm H_2O to 25.5 cm H_2O), and concentration of CCl in the feed gas, (1,550 ppm to 20,000 ppm), on HCl adsorption. The results of these experiments show that all three of the calcium compound powders are excellent adsorbents when used in their individual active temperature ranges. The active temperatures are: Ca(OH)_2, 600 K to 700 K; CaO, 700 K to 800 K; and CaCO_3, 700 K to 850 K. The highest reactant conversion rate for each compound is: Ca(OH)_2, 75.5%; CaO, 65%; and CaCO_3, 80.5%. When calcium compound particles are pretreated at temperatures over 1000 K, but below 1100 K, adsorbents with large surface area were produced, which allowed much higher conversion rates with relatively low pressure drop. The conversion rate of these adsorbents, measured as amount of calcium used, are all improved by a factor of three.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Applied Chemistry - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering, Chemistry and Environmental Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lao, Qian
Contributors dc:contributor
  • Shaw, Henry
  • Perlmutter, Howard David
  • Kebbekus, Barbara B.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1816

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lao, Qian. The removal HCl from hot gases with calcium compounds. https://digitalcommons.njit.edu/theses/1816