Back to search

NJIT

Modeling of rapid thermal processing system by finite element method

Abstract

dc:description.abstract

A finite element model for the Rapid Thermal Processing (RTP) system at NJIT was developed based on the software package MSC/NASTRAN. Based on this model, a thermal analysis of the 9" chamber, 3 zones (37 lamps) RTP system was conducted for various modes of system operation with the 6" silicon wafer temperature varying from 300 K to 1100 K. An open-loop control algorithm was developed in order to study the dependence of wafer temperature on time, position, and applied radiant heat distribution. It was shown that the non-uniformity in the radial temperature profile can be less than 3 C during wafer heating at the rate of 35 C per second. The developed model was also utilized for the analysis of the change in the wafer temperature profile due to the heat loss through thermocouple wiring attached to the wafer. It was shown that for a 0.005" Nickel-Chromium thermocouple the maximum disturbance of the wafer temperature profile at the thermocouple contact was only of the order of 0.1 C with the wafer temperature in the interval from 800 K to 1100 K.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Martynov, Helen
Contributors dc:contributor
  • Kosonocky, Walter F.
  • Manikopoulos, Constantine N.
  • Hou, Edwin

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1818

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Martynov, Helen. Modeling of rapid thermal processing system by finite element method. https://digitalcommons.njit.edu/theses/1818