Back to search

NJIT

Aluminum epitaxy on silicon

Abstract

dc:description.abstract

The purpose of this work was to study the effect of 4° miscut and chem¬ical pretreatment of Si(111) wafers on the epitaxial growth of Al by thermal evaporation in a UHV environment (~ 10^{-9} Torr). Two chemical pretreatments of the wafers were used. One included HF only and the other included NH_4F after an initial HF treatment. The substrates were not heated dur¬ing deposition. XRD measurements of the films were done before and after annealing in a high vacuum oven for one hour at temperatures between 200 and 350°C. The A1(200) films deposited on wafers pretreated with NH_4F have good quality as indicated by the narrow peaks in the XRD measurements. The peaks narrowed by almost 15% after annealing at temperature as low as 250°C. The surprisingly good crystallinity and orientation of these films were attributed to the uniformly distributed atomic steps formed on the substrate surface by the chemical pretreatment of NH_4F. The film deposition work and analytical studies were done at NJIT's Drexler Microelectronics Laboratory and AT&T Bell Laboratories respec-tively.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ramac, Samuel Cruz
Contributors dc:contributor
  • Marek Sosnowski
  • Roy H. Cornely
  • Haim Grebel

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1876

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ramac, Samuel Cruz. Aluminum epitaxy on silicon. https://digitalcommons.njit.edu/theses/1876