Abstract
dc:description.abstractThe catalytic oxidation of trichloroethylene(TCE) and dichloromethane (DCM) was investigated over a catalyst containing 4% PdO on Al_2O_3 washcoat and on a cordierite monolith with 400 channels per in^2. Reactivity and selectivity of the catalyst for the destruction of 200 ppm C_2HCl_3 and 500 ppm CH_2Cl_2 in air was evaluated over the temperature range 250 to 550 °C. This research was conducted in a tubular reactor system at space velocities of 4,000 to 24,000 v/v/hr. It was found that complete oxidation occurs at 500°C for DCM and 550°C for TCE. In addition to the expected products of combustion from DCM, CH_3Cl, CHCl_3, and CCl_4 were also found. CHCl3 was found at low temperatures and was destroyed above 500°C. The only chlorinated product produced in oxidation of TCE was C_2Cl_4 and was destroyed above 550°C. No significant CO formation was observed above 500°C for either compound. It was found that reaction temperature predicts conversion of the chlorocarbons and space velocity affects product distribution. Varying the oxygen concentration over a factor of 4 showed no effect on rate, thus allowing representation of the destruction process as a first order rate law in TCE oxidation. The Arrhenius activation energy is 34 kcal/mole. The HCl selectivity in the presence of 1.5% water or 0.5% methane was also investigated. It was found that the water and methane enhance the HCl selectivity and inhibit the formation of Cl_2. These two hydrogen sources also inhibited the formation of C_2Cl_4.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering, Chemistry and Environmental Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Yu, Tai-Chiang
- Contributors dc:contributor
-
- Henry Shaw
- Robert J. Farrauto
- Ching-Rong Huang
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/1882