NJIT
Reducing health and safety risks by replacing compressed air with an electromechanical system
Abstract
dc:description.abstractThe continuous use of compressed air in many applications can often be expensive and very noisy. When compressed air is blowing freely from a nozzle, it can be used in a variety of processes. One of these is checking for the presence of a product inside a box. In the manufacturing field, a facility has been using compressed air as a quality assurance inspector, to make certain that products are shipped properly. As the products go by on a conveyor, two employees must insert them into a carton as it is transferred to another conveyor. If an employee does not insert the product into a carton, it will be closed and processed the same way as if it were full. The carton will then pass over a compressed air jet; if it is too light it will be blown out of the way, if not, it will continue down the conveyor for shipping. The purpose of this thesis is to analyze the problems associated with the current setup and to correct them by installing a quieter and more economical system. It will examine the amplitude of noise for compressed air, the costs involved, the safety and health risks for employees, and the pro's and con's of various experimental ideas that can mitigate these problems.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Occupational Safety and Health Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Mechanical and Industrial Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Schwed, Joseph Michael
- Contributors dc:contributor
-
- Howard Gage
- Min-Yong Park
- Layek Abdel-Malek
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/1903