Back to search

NJIT

Thermal decomposition of 1,1,1-thrichloroethane-methane-oxygen mixture in tubular flow reactor

Abstract

dc:description.abstract

<p>The thermal decomposition of 1,1,1-trichloroethane in methane/oxygen mixtures and argon bath gas was carried out at 1 atmosphere total pressure in a tubular flow reactors. The thermal degradation of 1,1,1-trichloroethane and methane were analyzed systematically over temperature ranges from 500 to 800°C, with average residence times in the range of 0.05 to 2.5 seconds. Five reactants ratio sets in three different size flow reactors were studied.</p> <p>It was found that the complete decay (99%) of the 1,1,1-trichloroethane at 1 second residence time occurs at about 600°C for all the reactants ratio sets. The major product for 1,1,1-trichloroethane decomposition are 1,1-dichloroethylene and HCl. Oxygen has almost no effect on the decay of 1,1,1-trichloroethane in our study. Formation of CH<sub>2</sub>CCl<sub>2</sub> as one of major product from CH<sub>3</sub>CCl<sub>3</sub> increases with increasing temperature to a maximum near 600°C at 1.0 sec residence time and is independent of reactant ratio here. It then drops quickly with increasing temperature and increased O<sub>2</sub>. Faster decay of compounds, such as C<sub>2</sub>H<sub>3</sub>Cl, C<sub>2</sub>H<sub>2</sub>, C<sub>2</sub>H<sub>4</sub>, C<sub>3</sub>H<sub>6</sub>+ C<sub>3</sub>H<sub>8</sub> formed at lower temperature occurs when the reactor temperature is above 650°C, and higher oxygen levels in the mixture. The higher ratio of O<sub>2</sub> to CH<sub>4</sub>, the lower the temperature needed to observe formation of CO and CO<sub>2</sub>' The major products at temperatures above 750°C are HCl and non-chlorinated hydrocarbons: C<sub>2</sub>H<sub>2</sub>, C<sub>2</sub>H<sub>4</sub>, C<sub>3</sub>H<sub>6</sub>, C<sub>3</sub>H<sub>8</sub>, CO and CO<sub>2</sub>.</p> <p>An increase in surface to volume ratio of reactor tube was observed to accelerate the decomposition process in this study, but it had no effect on distribution of principal products.</p> <p>A detailed kinetic reaction mechanism was developed and used to model results obtained from the experimental reaction system. A sensitivity analysis of the model was done to show the most important reactions in the mechanism. The kinetic reaction mechanism was based on thermochemical principles and transition state theory.</p> <p>Rate constants obtained for initially important decomposition of 1,1,1-trichloroethane over the temperature range 500 - 800°C are:</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering, Chemistry and Environmental Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wu, Yo-Ping
Contributors dc:contributor
  • Joseph W. Bozzelli
  • Henry Shaw
  • Edward Robert Ritter

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/1954

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wu, Yo-Ping. Thermal decomposition of 1,1,1-thrichloroethane-methane-oxygen mixture in tubular flow reactor. https://digitalcommons.njit.edu/theses/1954