NJIT
Reaction of hydrogen with methylene chloride and carbon tetrachloride at high temperature
Abstract
dc:description.abstract<p>The reactions of methylene chloride and carbon tetrachloride in hydrogen in the temperature range 500 - 1000° C were studied using tubular flow reactors of three diameters. (ID: 0.40, 1.05, 1.60 cm). Residence time range was from 0.3 to 3.5 seconds. Temperature profiles of the reactors was kept within +/- 5° C of central 85% for the 18 inch long reactor, at a total pressure of 1 atmosphere. No chlorinated hydrocarbon products were observed at or above 950° C. The major products in this temperature range were CH4, C2H<sub>2</sub>, C2H<sub>4</sub>, C2H<sub>6</sub> and HCl.</p> <p>The pseudo first order plug flow model is used for analysis of the experimental data, the kinetic parameters and product distribution were experimentally determined for each size reactor. The wall and bulk reaction rate constants were decoupled via analysis of data from three different surface to volume reactors. The results show that the increase in the surface to volume ratio of the reactor tube, increases the decomposition of reactants. The following global rate equations are found to fit the data:</p> <p> a> Carbon tetrachloride in H<sub>2</sub>:</p> <p>k<sub>b</sub>= 7.26*10<sup>7</sup> EXP(-31,000/RT) (l/sec), gas phase</p> <p>k<sub>w</sub>= 9.77*10<sup>8</sup> EXP(-39,400/RT) (cm/sec) at the wall</p> <p>k values obtained under following conditions:</p> <p>ratio of s/v : 2.5 to 10</p> <p>H<sub>2</sub> : 1 Atm</p> <p>H<sub>2</sub> / CCl<sub>4</sub> ratio : 14 :: 1</p> <p>Temperatures : 500° C to 600° C</p> <p>b> Methylene Chloride in H<sub>2</sub>:</p> <p>k<sub>b</sub>= 2.84*10<sup>10</sup> EXP(-50,000/RT) (l/sec), gas phase</p> <p>k<sub>w</sub>= 2.65*10<sup>10</sup> EXP(-57,800/RT) (cm/sec) at the wall</p> <p>k values obtained under following conditions:</p> <p>ratio of s/v : 2.5 to 10</p> <p>H<sub>2</sub> : 1 Atm</p> <p>H<sub>2</sub>/CH<sub>2</sub>Cl<sub>2</sub> ratio : 4 :: 1</p> <p>Temperatures : 700° C to 800° C</p> <p>In addition to the kinetics study and product distribution, detailed mechanistic computer modelling of our reaction is also done, the results show good comparison to the experimental results with some difference between observed and calculated major products (HCl, CHCl<sub>3</sub>) and the reactant (CCl<sub>4</sub>).</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering, Chemistry and Environmental Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Tsao, Hun
- Contributors dc:contributor
-
- Joseph W. Bozzelli
- Charles M. Tsai
- Chen-Chong Lin
Subjects
dc:subject × 6Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/1984