NJIT
Reactions of hydrogen with chloroform and trichloroethylene at high temperatures
Abstract
dc:description.abstract<p>The reactions of chloroform and trichloroethylene with hydrogen in the temperature range 550 to 1000°C were studied using tubular flow reactors of varying diameters. The residence time range was from 0.05 to 3.0 seconds.Two different concentrations of the chlorinated species were used, each with hydrogen in large excess. Flat temperature profiles (+/- 5°C) were achieved over 80 to 85 per cent of the 45 cm long reaction zone, with inlet gases preheated to about 400°C.</p><p>No chlorinated hydrocarbons, products or reactants were observed at /above 850°C. The major products at these temperatures were C<sub>2</sub>H<sub>2</sub>, C<sub>2</sub>H<sub>4</sub>, CH<sub>4</sub>, HCL and benzene.</p><p>The first order plug flow model was used for analysis of the experimental data. A comparison of these results with a more rigorous laminar flow model is also shown. Wall and homogeneous phase rate constants were evaluated using Kaufman's method. The following rate equations were found to fit the data:</p><ol><li>Chloroform<br />k = 3.86 * 10<sup>12</sup>e<sup>(-35.3/RT)</sup> sec<sup>-1</sup>, gas phase.<br />k = 3.24 * 10<sup>14</sup>e<sup>(-43.4/RT)</sup> sec<sup>-1</sup>, at the wall.</li><li>Trichloroethylene<br />k = 4.54 * 10<sup>12</sup>e<sup>(-35.0/RT)</sup> sec<sup>-1</sup>, gas phase.<br />k = 9.6 * 10<sup>10</sup>e<sup>(-31.2/RT)</sup> sec<sup>-1</sup>, at the wall.</li></ol>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering, Chemistry and Environmental Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mahmood, Burhan
- Contributors dc:contributor
-
- Joseph W. Bozzelli
- Gordon Lewandowski
- Basil Baltzis
Subjects
dc:subject × 5Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2072