NJIT
The effect of ultrasonic vibrations and catalyst particle size on the decomposition of cumene
Abstract
dc:description.abstract<p>The effect of ultrasonic vibrations on the vapor phase decomposition of cumene to benzene and proplyene was investigated using silica-aluminum as the cracking catalyst.</p><p>The system consists of a tubular reactor with a 4 inch long catalyst chamber made from 1 cm. diameter stainless steel tubing. The catalyst bed was irradiated from above by means of an ultrasonic horn.</p><p>The reactor was run at temperatures of 850 to 950°F., frequencies of 26,000 and 39,000 Hz, with a power innut of 0.30 watts/cm.<sup>2</sup> . Feed rates of 100 to 300 gms./hr. and catalyst particle sizes of 0.0209 to 0.358 cm. were used.</p><p>Using the reactor design equation and the data obtained from this research it can be shown that in the area where surface reaction controlled, the surface reaction rate constant was not increased by the addition of ultrasound.</p><p>Therefore it is postulated that ultrasonic vibrations do not cause localized heating within the catalyst bed, but that ultrasound causes acoustic streaming within the catalyst pores, resulting on higher diffusion rates.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering and Chemistry
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pietranski, John F.
- Contributors dc:contributor
-
- Deran Hanesian
- Jerome J. Salamone
- Hung T. Chen
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2107