Back to search

NJIT

Heat transfer coefficients of non-Newtonian slurries in laminar flow

Abstract

dc:description.abstract

<p>A total of 51 heat transfer runs were made in the first 25 runs, slurries of half micron and finer kaolin at 3.0, 5.6, 9.6 and 12.9% solids were used. Slurries of two microns and finer kaolin at 10.1, 13.7, 20.4 and 23.1% solids were used in the remaining 26 runs.</p> <p>The Reynolds Numbers ranged from 0.9 to 2,020 for the 51 runs. </p> <p>The data was correlated by the following equation:</p> <p>H<sub>f</sub>/C<sub>b</sub>V<sub>b</sub>P<sub>b</sub> C<sub>b</sub>R<sub>b</sub>/K<sub>b</sub> <sup>2/3</sup> = 0.70 DV<sub>b</sub>P<sub>b</sub>/R<sub>b</sub> <sup>-2/3</sup></p> <p>for an L/D ratio of 68.7.</p> <p>This is essentially the accepted correlation for Newtonian fluids in laminar flow. The viscosity used for the slurries investigated was the apparent bulk viscosity obtained from measurements with a Fann V-G viscometer which gave shear rate versus viscosity data. The viscosity used was that at the same shear rate present in the heat exchanger.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Roth, Robert Frederick
  • Swanson, David B.
Contributors dc:contributor
  • Jerome J. Salamone
  • C. L. Mantell
  • Joseph Joffe

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2124

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Roth, Robert Frederick; Swanson, David B.. Heat transfer coefficients of non-Newtonian slurries in laminar flow. https://digitalcommons.njit.edu/theses/2124