Back to search

NJIT

Jacket heat transfer coefficients in an agitated vessel, the paddle agitator

Abstract

dc:description.abstract

<p>Four papers have been published which correlate variables affecting heat transfer through a jacket in a kettle agitated by a paddle type agitator. There are differences in the equations resulting from each of these papers. In none of these papers was variation of the stirrer diameter or stirrer width considered.</p><p>It is the purpose of this paper to show that all published data in such a system can be correlated by a single equation which differs from those previously presented. Preliminary recalculation of published data indicated that a relationship exists which involves the stirrer width and diameter. Experimental work was undertaken to provide data for determining this relationship.</p><p>As a result of this work, the following equation is proposed to correlate heat transfer coefficients on the wall of a jacketed kettle agitated by a paddle type agitator with the fluid and geometric variables:</p><p>hT/k = 0.112(cμ/k).44 (D2Np/μ)<sup>.75</sup> (μ/μ<sub>w</sub>)<sup>.25</sup>(T/D)<sup>.40</sup> (D/D<sub>w</sub>)<sup>.13</sup></p><p>It is believed that this best expresses the data observed by the author. It is further believed to express adequately all previously published data. Without the two groups (T/D) and (D<sub>w</sub>/D), equations having coefficients ranging from 0.097 to 0.176 were derived. These varying coefficients result from the use of different agitators having different ratios of T/D and D<sub>w</sub>/D. Without these correlating groups, the limiting equations vary in coefficient by a factor of two. For a given system at any Reynolds number, heat transfer coefficients derived from the limiting equations also would vary by a factor of two.</p><p>This is the first paper on this subject to include the terms (T/D) and (D<sub>w</sub>/D) in such a correlation. This is the first paper to suggest an exponent other than 2/3 for the Reynolds number. This is the first paper to suggest the 0.44 power of the Prandtl number. Brown, Scott and Toyne (22) suggested that this exponent should be 1/4. Uhl (151), however, suggested that it might be greater than 1/3. The -1/4 exponent chosen for the ratio (μ<sub>w</sub>/μ) is essentially the same as that (-0.24) proposed by Uhl (151).</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pursell, Herbert Palfrey
Contributors dc:contributor
  • George C. Keeffe

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2270

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Pursell, Herbert Palfrey. Jacket heat transfer coefficients in an agitated vessel, the paddle agitator. https://digitalcommons.njit.edu/theses/2270