Back to search

NJIT

The effects of twist on pressure through a teflon vascular prosthesis

Abstract

dc:description.abstract

<p>A closed loop fluid system was developed which mimics the flow curve in the human circulatory system in order to test the effects of pressure drop and flow velocity on artificial arterial implants. This device consists of a piston pump connected to a microcomputer controlled servo-motor. Fluid (in this case distilled water) flows through transparent Tygon tubing to a test chamber. The prosthetic tube is placed in the fluid but is attached through a specially constructed chamber. The pressure across the implant can be measured for different conditions. System compliance was generated by using flexible tubing in the return loop and fluid resistance was developed by using filters.</p><p>Experiments were performed using standard tubing as well as artificial grafts to test the concept that twist of the implant effects flow. The pressure drop across the implant was measured with an increasing twist. Various lengths and tensions were tested. The results indicate that there is no correlation between twist (from 0 to 180 degrees) and pressure drop.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Biomedical Engineering - (M.S.)
Discipline thesis:degree_discipline
Biomedical Engineering Committee

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Olivieri, Steven Alfred
Contributors dc:contributor
  • Clarence W. Mayott
  • David S. Kristol
  • Frank T. Padberg

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2333

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Olivieri, Steven Alfred. The effects of twist on pressure through a teflon vascular prosthesis. https://digitalcommons.njit.edu/theses/2333