Back to search

NJIT

Application of theory to extrusion of polyethylene

Abstract

dc:description.abstract

<p>This thesis reviews the theory of isothermal melt extrusion beginning with the writings of early researchers up to its present state. The isothermal extrusion of a near-Newtonian liquid is compared to polyethylene, using five different extrusion screws, and calculated discharge rates are compared to the actual rates for both materials. A method of calculating forward flow was developed and this was shown to provide very good correlation with actual dis-charge rates.</p><p>Non-isothermal or plasticating extrusion of polyethylene was also studied and comparison is made to isothermal melt extrusion. The results obtained with the various types of screws studied are also discussed.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Griesser, Ernest Edward
Contributors dc:contributor
  • C. L. Mantell
  • Joseph Joffe
  • George C. Keeffe

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2345

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Griesser, Ernest Edward. Application of theory to extrusion of polyethylene. https://digitalcommons.njit.edu/theses/2345