Abstract
dc:description.abstract<p>The literature on ammonia-catalyzed phenol-formaldehyde resins is reviewed and critical comparisons are made of the manner in which the ammonia-catalyzed resins differ from both the alkali- and acid-catalyzed resins.</p><p>Intermediate products formea during the initial stapes of the ammonia-catalyzed phenol-formaldehyde reactions, as reported in the literature, are tabulated and % N contents are calculated.</p><p>Experimental determinations of N content of resins with molar ratios of 1:1.25 phenol to formaldehyde with ammonia at 0.2, 0.5, and 1.0 moles per mole of phenol, show that at the 0.2 molar ratio of ammonia, all the N enters into the resin and remains during the curing of the resin. At 0.5 and higher molar ratios of ammonia, only a portion of the N enters the resin. At low bakes (conversion of "A" to "B" stage;, the N increases, probably by loss of H<sub>2</sub>O or CH<sub>2</sub>O from the resin. In the fully-cured resins, N content of all the resins based on 1:1.25 phenol to formaldehyde drops to the same level as in the resin formed using 0.2 moles of ammonia, i.e. (2.75 ± .2% N).</p><p>When the formaldehyde ratio is increased to 2.0 moles per mole of phenol, and using 1.0 mole of ammonia, the N content of the fully-cured resin is 4.63%, an increase proportional to the increase in formaldehyde.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ehrgott, Murlin Charles
- Contributors dc:contributor
-
- James A. Bradley
- C. L. Mantell
- Saul I. Kreps
Subjects
dc:subject × 2Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2409