Back to search

NJIT

The effect of reaction block configuration on unit pressure in rubber forming

Abstract

dc:description.abstract

<p>This investigation was made to determine the effect of reaction blocks on the forming pressures produced in solid pad rubber forming. The pressures developed after the addition of six basic reaction block designs, at four distances from the form block, were determined and compared to the pressures developed without a reaction block.</p><p>The effect of rubber hardness was determined by conducting duplicate tests with pads having a durometer hardness of 50 and 65 Shore "A".</p><p>The addition of a reaction block produced a maximum increase in pressure of 9.75% and was found to be detrimental under many of the test conditions.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gilmer, James Everett
Contributors dc:contributor
  • C. L. Mantell
  • George C. Keeffe
  • Joseph Joffe

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2519

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gilmer, James Everett. The effect of reaction block configuration on unit pressure in rubber forming. https://digitalcommons.njit.edu/theses/2519