Back to search

NJIT

Measurement of the specific surface of perlite

Abstract

dc:description.abstract

<p>A low temperature gas adsorption apparatus was designed for the purpose of measuring the total surface area of solids using the well known B.E.T. method.</p><p>The apparatus was designed so that several different gases could be used as adsorbates without evacuating the gas reservoirs each time a different adsorbate was to be used. This was accomplished by providing three gas reservoirs of sufficient capacity to allow several determinations to be made at moderate initial reservoir pressures of from two to three pounds per square inch. A separate bulb and manometer system was supplied for determining the saturation pressures of adsorbates used. Although the primary objective was to determine the surface area of expanded perlite, the gas burette volumes of the apparatus were designed large enough to permit the evaluation of surface areas over a wide range of values.</p><p>Several samples with known areas were checked using N<sub>2</sub> as the adsorbate to establish confidence factors and the values for the surface areas of several perlite samples are reported.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Chemical Engineering - (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Lamborn, Richard Gordon
  • Vogel, Carl Henry
Contributors dc:contributor
  • C. L. Mantell
  • George C. Keeffe
  • Saul I. Kreps

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2531

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lamborn, Richard Gordon; Vogel, Carl Henry. Measurement of the specific surface of perlite. https://digitalcommons.njit.edu/theses/2531